Home Page

SERIES 90 ANALYZERS

There are two basic versions of the Series 90. The original, low-voltage version is the Series 90. A high-voltage version is the Series 90HV.
Series 90
The Series 90, the low voltage version, consists of two models. The Series 90-S9, with a 9-board Expansion Cabinet, may be ordered with 1 to 9 low-voltage 128-point scanner boards. Fully loaded with scanner boards, the 9-board cabinet provides 1152 test points. The Series 90-S32, with a 32-board Expansion Cabinet, may be ordered with 1 to 32 scanner boards. The fully loaded 32-board cabinet provides 4096 test points.

Additional 9 and 32-board Expansion Cabinets can be incorporated, in any combination, in either model. They may be ordered with partial or full complements of scanner boards.


Series 90 with 9 Board Cabinet
(Series 90 S9)

Series 90 with 32 Board Cabinet(Series 90 S32)

FEATURES
  • PC-based Tester/Analyzer/Build Aid
  • Expandable to 131,072 test points
  • Programmable Options/Parameters
  • Programmable build methods
  • Color-graphics build instructions
  • Component measurement
  • Interconnect expansion cabinets up to 200 feet
Series 90HV
The Series 90HV combines low-voltage solid-state technology with high-voltage relay technology solid-state devices for testing continuities and components at low voltage; relays for testing high-resistance isolation and high-current continuity. The high-resistance isolation tests are typically used to test the quality of harness insulation material. High-current continuity tests are used to test the quality of harness connections. Since the Series 90HV contains all the Series 90 features, it can be used as an assembly aid. A high-voltage password lock-out feature has been incorporated for operator protection. 

The Series 90HV is available in one model, the Series 90HV-S23, which has a 23-board High Voltage Expansion Cabinet. It may be ordered with 1 to 23 high-voltage 64-point scanner boards. A fully loaded 23-board cabinet provides 1472 test points. 

90HVS23.gif (39666 bytes)
(Series 90HV S23 High Voltage Tester)

FEATURES
  • PC-based Tester/Analyzer/Build Aid
  • High-voltage capability
  • Expandable to 47,104 test points
  • Programmable Options/Parameters
  • Programmable build methods
  • Color-graphics build instructions
  • Component measurement
  • Interconnect expansion cabinets up to 200 feet
Series 90L4, Series 90L8 & Series 90H8
The Series 90L4, Series 90L8, and Series 90H8 provide the PC-based power of the larger Series 90, but in an economical package for users who do not require more than 512 or 1024 test points. These analyzers are designed to operate under the control of your PC. The Series 90L4 and Series 90L8 are a low-voltage system expandable from 128 to 512 test points for the Series 90L4 and from 128 to 1024 test points for the Series 90L8. both these testers are expandable in 128-point increments.  The Series 90H8 is a high-voltage system expandable in 64-point increments from 64 to 512 test points and provides isolation tests to 1,500 vdc and high current continuity tests up to 1 amp.

These analyzers provide you with all the test and build capabilities of the standard Series 90 and Series 90HV analyzers, without built-in PC controllers. They are supplied with software to run on most Windows-based computers, interconnected through their serial ports.

 


 
90L4.gif

(Series 90 L4)
90L8.gif

(Series 90 L8)
90H8.gif

(Series 90 H8 High Voltage Tester)
FEATURES
  • PC-based Tester
  • Expandable to 512 or 1024 test points
  • Programmable Options/Parameters
  • Programmable build methods
  • Color-graphics build instructions
  • Component measurement
  • Works from your Windows PC

 

SERIES 90 MODEL SPECIFICATIONS

PARAMETER

LOW-VOLTAGE

HIGH-VOLTAGE

MODELS Series 90-S9
Series 90-S32
Series 90L4
Series 90L8
Series 90HV-S23
Series 90H8
CAPACITY

Series 90:
Up to 131,072 test points.
Series 90L4:
Up to 512 test point.
Series 90L8:
Up to 1024 test point
(128-point increments)

Series 90HV:
Up to 47,104 test points.
Series 90H8:
Up to 512 test points
(64-point increments)

CONTINUITY

2 Wire Test:
1.0 ohms to 50.0 kohms
4 Wire Test:
1.0 ohms to 50.0 kohms

2 Wire Test:
0.10 ohms to 50.0 kohms
4 Wire Test:
0.01 ohms to 50.0 kohms

CURRENT 0.512 ma to 5.12 ma
(Auto ranging)
0.512 ma to 1.0 amp
ISOLATION
(Shorts Threshold)
10 ohms to 9.5 Mohms 10 ohms to 9.5 Mohms @ 5 vdc
500 kohms to 1.00 Gohms *
(* depends on test voltage)
CONTINUITY TEST VOLTAGE 5 vdc or 200 mvdc
ISOLATION TEST VOLTAGE 5 vdc or 200 mvdc 5 vdc to 1500 vdc or
200 mvdc
RAMP TIME: N/A 40 volts to 10 kvolts
per second
RESISTANCE TEST 1.11 ohm  to 8.64 Mohms
( 10% 1 ohm)
CAPACITANCE TEST Standard Version: 1.11 nf to 9.09 mf ( 20%)
Precision Cap. Version: 5.56 pf to 9.09 mf ( 20% 9 pf)
DIODE TEST Voltage drop: 55.6 mv to 4.36 v ( 10%)
DWELL TIME Auto or Programmable: from 1 s to 1 min
TEST SPEED Continuity: 500 points/sec
Component: 50 points/sec
  High Current: 20 points/sec
Isolation: 20 points/sec *
(* plus dwell & ramp-up time)
DIMENSIONS & WEIGHT

 

Series 90/90HV System Controller:
6.0 x 23.5 x 15.0 inches
(15.2 x 59.7 x 39.1 cm)

26 lbs. (11.8 kg)

Series 90-S9 Expansion:
6.0 x 23.5 x 15.0 inches
(15.2 x 59.7 x 39.1 cm)

21lbs (9.5 kg) plus
1 lb. (0.5kg) per 128 points

Series 90-S32 Expansion:
15.0 x 23.5 x 15.0 inches
(38.1 x 59.7 x 39.1 cm)

31 lbs. (14.1 kg) plus
1 lb. (0.5kg) per 128 points

Series 90L4
7.0 x 12.25 x 12.75 inches
(17.8 x 31.1 x 32.4 cm)

18 lbs. (8.2 kg) plus
1 lb. (0.5kg) each additional board

Series 90L8
9.75 x 12.25 x 12.75 inches
(24.8 x 31.1 x 32.4 cm)

18 lbs. (8.2 kg) plus
1 lb. (0.5kg) each additional board

Series 90HV-S23 Expansion:
14.5 x 24.1 x 12.0 inches
(36.8 x 61.2 x 30.5 cm)

32 lbs. (14.6 kg) plus
1.5 lbs. (0.68kg) per 64 points

Series 90H8
9.75 x 12.25 x 12.75 inches
(24.8 x 31.1 x 32.4 cm)

18 lbs. (8.2 kg) plus
1.5 lbs. (0.68kg) per 64 points